MiBoxer Mi Light FUT037P+ 20A RF Receiver for RGB Led Strip RGB+W RGB+CCT 12/24/48V

MiBoxer FUT037P+ is a 2.4Ghz Receiver/DimmerRF to control RGB, RGB+W and RGB+CCT led strips working at constant voltage 12V, 24V and 48V. The special feature of this product is the maximum supported power of 20A, which allows very powerful LED strips to be controlled without the use of an amplifier.

Replaces Receiver: FUT37S; FUT038S; FUT039S

With this receiver you can control your LED strip via remote control from the comfort of your sofa.

It is also compatible with one or more Led Strips connected in parallel.

The 2.40Ghz RF signal reaches up to 30m.

On the device you will find the SET button that will allow you to set the receiver to the required mode (RGB, RGb+W or RGB+CCT). If you are connecting it to an RGB LED strip, press the set button until the indicator light turns red. Instead, to set it to RGB+W mode the indicator light should be green. If you have an RGB+CCT LED strip instead the indicator light should be Blue.

- Red: RGB

- Green: RGB+W

- Blue: RGB+CCT

The SET button will also be used to put the receiver into pairing mode. Press and hold briefly to enter RF pairing mode.

Through the use of a Gateway you will be able to manage your LED strip from your smartphone and enjoy many functions.

Functions:

Power on and off

Brightness management from 10%-100%

Coloured light management

RGB+CCT temperature management

Compatible with all MIBOXER RGB, RGB+W and RGB+CCT remote controls

DATASHEET:

Model: FUT037P+

Voltage: DC 12V / 24V / 48V

Wireless Protocol: RF 2.4ghz

Maximum current per channel: 20A

Maximum total current: 20A

Maximum radio frequency control distance: 30 metres

Dimensions: 119.5x47x23mm

Creating an LED home automation system is simple and innovative with Mi Light MiBoxer products.

King Led SRL IS THE OFFICIAL ITALY RESELLER OF MI-LIGHT®.

MiBoxer® is the new sub-brand of Mi Light 

How to synchronise the MiBoxer FUT037P+ to a MiBoxer remote control

- Install the receiver correctly to a power supply and LED strip.

- Set the receiver to the mode compatible with your led strip

- Set the receiver to pairing mode (the indicator light on the device starts flashing)

- Check that the remote control is compatible with the FUT037S+ Receiver

- Switch off the Receiver (by removing power from the power supply)

- Switch on the Receiver

- When the Led strip connected to the Receiver lights up, within 3 seconds, press repeatedly (at least 1 time per second) on one of the "I" symbols located at the bottom of the remote control at the zone you wish to associate.

-If synchronisation is successful, the LED flashes.

Here's How to Sync the Miboxer LED Strip Receiver with the Remote Control:

In the video, we demonstrate the process of pairing the WL5 receiver with a remote control. Regardless of the Miboxer RF receiver or remote control used, the procedure will be the same (including with Miboxer bulbs and spotlights). This same procedure is used to uncouple the receiver from one zone of the remote control. So, if you want to associate the receiver with another zone, simply follow this procedure to uncouple it and repeat it a second time to pair it with another zone.