Led Strip H.C. CRI90 24W 2160lm 24V IP68 PCB 10mm Coil of 350 SMD 2216

Waterproof IP68 dimmable 24W 24V LED Strip for outdoor installation, even by immersion*, dimmable, 10mm wide and can be cut every 100mm

This IP68 waterproof professional 24V LED Strip is designed to be installed outdoors. The PCB is protected by a silicone coating (no air inside and therefore no danger of condensation) that protects it from water splashes, moisture and dust. The IP68 waterproof rating makes the LED strip totally impermeable to liquids and allows permanent immersion. Specifically, we are talking about a maximum depth of 3 metres for more than 1 hour; moreover, protection from a jet of 10 bar pressure exerted in all directions is guaranteed.

If installed outdoors or if submerged, it is strongly recommended to install the LED strip with waterproof connectors.

This led strip can be cut every 100mm, but once the cut has been made, the waterproofness must be restored by means of the end caps included in the package and silicone (not included).

Warning! Once cut, the strip loses its Ip68 waterproof rating and becomes IP67. 

This LED strip has a total power of 24W (sold in 5 metre coils) and an effective power of 4.8W per metre. The entire reel is equipped with 350 LED chips (70 LEDs/mt) model 2216.

To control the strip, simply connect it to a receiver/controller for single-colour LED strip via radio frequency or WIFI that you will find on sale on our e-commerce. By connecting it to a WIFI receiver for single-colour led strips (not included and purchasable separately), you will also be able to manage your led strip via smartphone and/or voice assistant.

Important: The led strip must always be installed on an aluminium profile for led strips to dissipate heat and guarantee its integrity over time. Several LED strips must be connected in parallel.

Brief Summary:

SMD Led Chip 2216

Waterproof IP68

Supply voltage DC 24V (Power supply not included)

Led Strip Dimmable and Cut to any 7 Leds (100mm)

Nominal Power 24W per Coil / Power Consumption 4.8W /mt

TECHNICAL DATA SHEET 

PCB Width 10mm

Height PCB+SMD 20mm 

Coil length 5mt 

Power supply DC 24V 

Nominal Power 24W 

Effective Power 4.8W /mt 

Kelvin: Warm Light 3000K; Natural Light 4000K; Cold Light 6000K

Led Type SMD 2216

Cuttable Every 7 Led / 100mm 

Waterproof IP68

Dimmable YES 

Operating temperature -40° to +80°. 

Degrees Certifications CE / RoSH

2 Year Warranty