Led Strip 20 metres 144W 16,000 Lumen DC 24V IP20 PCB 8mm Coil 1200 smd 2835 Samsung S2

Led Strip with Samsung Chip

Power Supply Voltage DC 24V (Power Supply not included)

Led Strip Dimmable and Cut to Every 6 Led (100mm)

Nominal Power 144W per Coil / Power Consumption 6.8W /mt

Nominal Lumen 16,000lm per Coil / Effective Lumen 728lm /mt

20-meter Coil

Professional Use

Feed to each 10mt maximum, in case of longer lengths feed from both sides

20m Led 2835 strip, mounted on double-sided adhesive tape from 3M. 

60Led/mt, (1200 Led total) this Led strip is cut to every 6 Led (100mm). 

Samsung S2 Led Chip

High quality strip suitable for continuous use both professional and DIY.

Connection of multiple Led strips must be done in parallel. 

Installation requires the use of aluminum profiles for dissipation. 

TECHNICAL DATA SHEET. 

PCB width 8mm 

Height PCB+SMD 2mm 

Coil length 20mt 

Power supply DC 24V 

Nominal Power 144W 

Effective Power 6.8W /mt 

Nominal Lumen 16,000lm 

Effective Lumen 728lm /mt 

Kelvin 2700K / 4000K / 6500K

Color Rendering (CRI) 85+ 

Led Type 2835 x 1200pcs 

Cuttable Every 6 Led / 100mm 

Waterproof IP20 

Dimmable YES 

Operating Temperature -20° to +40° Degrees 

Certifications CE / RoSH / TUV / UL on request 

Warranty 3 Years 

CORRECT INSTALLATION

To ensure maximum performance in terms of light output and lifetime, installation on a special aluminum profile, designed for proper heat dissipation, is mandatory. Aluminum profiles not only dissipate heat, but also protect the LED strips from dust, insects, and partially from moisture.  

CORRECT POWER SUPPLY

LED strips must be powered with a constant voltage power supply, usually with a DC symbol. 

A DC 48V power supply is required for 48V LED strips.

Please note that 48V led strips powered from one end can reach the maximum length of 5mt. To reach longer lengths, it is mandatory to power the strip from both ends or in 5mt sections.

Always use a power supply with power higher than the power of the led strip.

DIMMERATION

To adjust the light intensity of a led strip you must use a suitable controller.

You can dim led strips with a WiFi controller, by Button or by voice control from Alexa or via Smartphone.