Strip Led 5m RGB 72W 24V IP67 PCB 13mm 300 SMD 5050

IP67 waterproof RGB led strip with colored light with DC 24V 72W power supply. Strip Led Dimmable and Cuttable to every 6 Led (100 mm).
Nominal Power 72W per Coil / Power Consumption 14.4 W / mt.

5050 Led Strip of 5 meters with 60 Led / mt (300 Led total) with 13mm wide PCB.

By means of a Mi-Light controller (sold separately) you can create all possible colors, up to 16 million colors.
Thanks to this led strip you can create excellent colorful environments or light effects.

The connection of several Led strips must be carried out in parallel.
For installation it is necessary to use aluminum profiles for dissipation.

Power supply not included!

Warning: If you cut the strip this coil loses its IP67 waterproof rating

DATA SHEET:

Led number: 300 (60 / mt)
Rated power: 72W (14.4W / mt)
Power supply voltage: DC 24V
Dimmable: Yes
Led type: SMD5050
Nominal Luminous Flux: -
Efficiency: -
Color Temperature: RGB colored light
Light angle: 120 °
Color rendering index: -
Strip length: 5000mm
Width: 13mm
Cutting Segment: 6 LEDs / 100mm
Height: 3mm
PCB color: White
Protection: IP67
Certificates: TUV, RoHS
Warranty: 3 Years

CORRECT INSTALLATION

To ensure maximum performance in terms of light output and duration, installation on a special aluminum profile is mandatory, designed for correct heat dissipation.

The aluminum profiles not only dissipate heat, but also protect the LED strips from dust, insects and partially moisture.

PROPER NUTRITION

The LED strips must be powered with a constant voltage power supply, usually with the DC symbol. A DC 24V power supply is required for the 24V led strips.

To calculate the required wattage of the power supply to buy for your led strip, just do a simple mathematical multiplication:

"N ° meters of led strip x Watt per meter absorbed by the strip model = Essential power of the power supply"

Warning: Always buy a slightly more powerful power supply for the result obtained, otherwise your power supply would always work at full load and you would risk burning it.

"Ex: You have 3 meters of 20W LED strip per meter and you want to buy a power supply, the operation to be done will be this: 20 W x 3mt = 60W total absorption for 3 meters of LED strip. You will therefore need a power supply unit of at least 100W "

Remember that the 24V led strips, powered at one end, can reach a maximum length of 5m. To reach higher lengths it is mandatory to feed the strip to both ends or in 5m sections.

Always use a power supply with a power greater than the power of the led strip.

DIMMERATION

To adjust the light intensity and the color of the light of a LED strip it is necessary to use a suitable controller.

You can dim the LED strips with a WiFi controller, from the Button, use Alexa's voice control, remotely manage via Smartphone and also set a timer.