Led Strip for Food Counter with Fruits and Vegetables 72W 24V 5000K coil of 700 SMD 2835 CRI97+ Full spectrum

72W 24V ultra-high colour rendering CRI97+ Full Spectrum food counter LED strip with 5000K light and 10mm PCB

DESCRIPTION

5 m Led Strip 2835, mounted on 3M double-sided adhesive tape.

140 Led/mt, (700 Led total) this Led strip is dimmable and can be cut to every 7 Led (50mm).

Several Led strips must be connected in parallel.

Aluminium profiles for dissipation are required for installation.

This 5000K strip is ideal for illuminating the counter of a greengrocer, supermarket or convenience store

Power Supply Voltage DC 24V (ballast not included).

Nominal Power 72W per Coil / Power Consumption 14.4 W/mt

TECHNICAL DATA SHEET:

Number of LEDs: 700 (140/mt)

Nominal power: 72W (14.4W/mt)

Supply voltage: DC24V

Dimmable: Yes

Led type: SMD2835

Nominal Luminous Flux: -

Efficiency: -

Colour Temperature: 5000K

Light Angle: 120°

Colour rendering index: 80+

Strip length: 5000mm

Width: 10mm

Segment Cut: 7 LEDs / 50mm

Height: 2 mm

PCB colour: White

Protection: IP20

Certificates: TUV , RoHS 

Warranty: 3 Years

 ------------------------------------------

CORRECT INSTALLATION

To ensure maximum performance in terms of light output and duration, installation on a special aluminum profile is mandatory, designed for correct heat dissipation.

The aluminum profiles not only dissipate heat, but also protect the LED strips from dust, insects and partially moisture.

PROPER NUTRITION

The LED strips must be powered with a constant voltage power supply, usually with the DC symbol. A DC 24V power supply is required for the 24V led strips.

To calculate the required wattage of the power supply to buy for your led strip, just do a simple mathematical multiplication:

"N ° meters of led strip x Watt per meter absorbed by the strip model = Essential power of the power supply"

Warning: Always buy a slightly more powerful power supply for the result obtained, otherwise your power supply would always work at full load and you would risk burning it.

"Ex: You have 3 meters of 20W LED strip per meter and you want to buy a power supply, the operation to be done will be this: 20 W x 3mt = 60W total absorption for 3 meters of LED strip. You will therefore need a power supply unit of at least 100W "

Remember that the 24V led strips, powered at one end, can reach a maximum length of 5m. To reach higher lengths it is mandatory to feed the strip to both ends or in 5m sections.

Always use a power supply with a power greater than the power of the led strip.

DIMMERATION

To adjust the light intensity of a LED strip it is necessary to use a suitable controller.

You can dim the LED strips with a WiFi controller, from the Button, use Alexa's voice control, remotely manage via Smartphone and also set a timer.