RGB+CCT Led Strip 144W 24V IP65-TR PCB 13mm Multicolour and Dual White

5-Meter Waterproof LED Strip IP65 Multicolor RGB + CCT with Adjustable White Light Temperature

This RGB+CCT DC 24V LED Strip (Power supply not included) is dimmable and cuttable every 100mm (18 LEDs).
Nominal Power 144W per Roll / Consumption Power 28.8 W/m.
This LED strip can create all possible colors, including white lights from 2700K to 6000K.

This special LED strip consists of 900 LEDs, with 5050 LED chips for RGB and 2835 LED chips for Dual White, over a length of 5 meters, mounted on 3M adhesive tape. 

With 180 LEDs/m, this LED strip is cuttable every 100mm, every 18 LEDs.

When used with a Mi-Light controller (sold separately click here), you can create all colors and all Kelvin gradients from 2700K to 6000K.
With this LED strip, you can create great colored environments with colored light effects or simply illuminate with white light, choosing the Kelvin you prefer. 

The connection of multiple LED strips must be done in parallel. 
For installation, the use of aluminum profiles for dissipation is necessary.

Once cut, the LED strip will lose its waterproofing. It is necessary to restore waterproofing.

It is highly recommended to test the LED strip before proceeding with cuts and installation.

TECHNICAL DATA SHEET

Code: 5098
PCB Width: 13mm (including heat shrink tube width)
PCB+SMD Height: 2mm 
Roll Length: 5m 
Power Supply: DC 24V 
Nominal Power: 144W 
Consumption Power RGB+CCT: 28.8 W/m 
RGB Consumption: 14.4W/m
White Consumption: 14.4W/m
Nominal Lumen: 15,840lm 
Effective Lumen: RGB --- / White Light 1600 lm/m 
Multicolor Light: RGB + CCT (2700K-6000K) 
Color Rendering Index (CRI): 80+ 
LED Type: SMD 2835 + SMD 5050 
Cuttable: Every 100mm 
Waterproof: IP67
Dimmable: Yes 
Operating Temperature: -20° to +40° Celsius 
Certifications: CE / RoHS / UL / TUV
Warranty: 2 Years 

PROPER INSTALLATION

For maximum performance in terms of luminous efficiency and longevity, it is mandatory to install on an appropriate aluminum profile designed for proper heat dissipation.

Aluminum profiles not only dissipate heat but also protect LED strips from dust, insects, and partially from moisture.

PROPER POWER SUPPLY

LED strips must be powered with a constant voltage power supply, usually marked with the DC symbol.

For 24V LED strips, a DC 24V power supply is necessary.

It should be noted that 24V LED strips powered from one end can reach a maximum length of 5 meters. To achieve longer lengths, it is mandatory to power the strip from both ends or in 5-meter sections.

Always use a power supply with a higher power rating than the LED strip's power.

DIMMING

To adjust the brightness of an LED strip, a suitable controller is required.

You can dim LED strips with a WiFi controller, by Button, use Alexa voice control, manage remotely via Smartphone, and even set a timer.