Led Strip H.C. CRI90 24W 2100lm 12V IP20 PCB 8mm coil of 300 SMD 2835

24W 2100lm 12V high color rendering dimmable Led strip for indoor use with IP20 waterproof PCB width 8mm 300 SMD 2835 coil

DESCRIPTION

Led strip 2835 of 5 meters, mounted on 3M double-sided tape.
60 Led / mt, (300 Led total) this Led strip is dimmable and cuttable to every 3 Led (50mm).
The connection of several Led strips must be carried out in parallel.
For installation it is necessary to use aluminum profiles for dissipation.

With Luminous Efficiency of 87 lm / W
Power Supply DC 12V (Power supply not included).
Nominal Power 24W per Coil / Power Consumption 4.8 W / mt
Nominal Lumen 2100 Lm per Coil / Effective Lumen 420 Lm / mt

DATA SHEET:

Led number: 300 (60 / mt)
Rated power: 24W (4.8W / mt)
Power supply voltage: DC12V
Dimmable: Yes
Led type: SMD2835
Nominal Luminous Flux: 2100Lm (420 Lm / mt)
Efficiency: 87 Lm / W
Color Temperature: / 3000K / 4000K / 6000K
Light angle: 120 °
Color rendering index: 90+
Strip length: 5000mm
Width: 8mm
Cutting Segment: 3 LEDs / 50mm
Height: 1.5mm
PCB color: White
Protection: IP20
Certificates: TUV, RoHS
Warranty: 3 Years
Code: 5548 - 5456 - 5547

CORRECT INSTALLATION

To ensure maximum performance in terms of light output and duration, installation on a special aluminum profile is mandatory, designed for correct heat dissipation.

The aluminum profiles not only dissipate heat, but also protect the LED strips from dust, insects and partially moisture.

PROPER NUTRITION

The LED strips must be powered with a constant voltage power supply, usually with the DC symbol. A DC 12V power supply is required for the 12V led strips.

To calculate the required wattage of the power supply to buy for your led strip, just do a simple mathematical multiplication:

"N ° meters of led strip x Watt per meter absorbed by the strip model = Essential power of the power supply"

Warning: Always buy a slightly more powerful power supply for the result obtained, otherwise your power supply would always work at full load and you would risk burning it.

"Ex: You have 3 meters of 20W LED strip per meter and you want to buy a power supply, the operation to be done will be this: 20 W x 3mt = 60W total absorption for 3 meters of LED strip. You will therefore need a power supply unit of at least 100W "

Remember that the 12V led strips, powered at one end, can reach a maximum length of 5m. To reach higher lengths it is mandatory to feed the strip to both ends or in 5m sections.

Always use a power supply with a power greater than the power of the led strip.

DIMMERATION

To adjust the light intensity of a LED strip it is necessary to use a suitable controller.

You can dim the LED strips with a WiFi controller, from the Button, use Alexa's voice control, remotely manage via Smartphone and also set a timer.