H.C. Series Led Strip CRI90 48W 4800lm 12V IP65-TR PCB 8.5mm Coil of 600 SMD 2835

Professional Led Strip 12V waterproof high colour rendering 48W 4800lm for outdoor use IP65-TR PCB width 8.5mm coil of 600SMD 2835

This high colour rendering 12V LED Strip model, thanks to a CRI index of 90, renders the colours of illuminated objects incredibly realistic as if they were illuminated by natural light. Available in different light colours, choose the light temperature you prefer, between cold, warm or natural light.

This LED strip has a total power of 48W (calculated on a 5-metre coil) and an effective power of 9.6W per metre. The entire reel is equipped with 600 LED chips (120 LEDs/mt) model 2835 can emit up to 4800 lm (960 lm per metre) with a luminous efficiency of 100lm/W.

Thanks to the double-sided adhesive already installed on the back of the strip, installing it on an aluminium profile is very easy.

To be able to dim it, simply connect it to a receiver/controller for radio frequency or WIFI LED strips that you will find for sale on our e-commerce. By connecting it to a WIFI receiver for single-colour led strip (not included and purchasable separately), you will be able to manage your led strip also via smartphone and/or voice assistant.

Important: The led strip must always be installed on an aluminium profile for led strips to dissipate heat and guarantee its integrity over time. Several LED strips must be connected in parallel. If you cut the strip this coil loses its iP65 waterproof rating 

DATA SHEET:

Number Led: 600 (120/mt)

Nominal power: 48W (9.6W/mt)

Supply voltage: DC24V

Dimmable: Yes

Led type: SMD2835

Nominal Luminous Flux: 4800Lm (960 Lm/mt)

Efficiency: 100Lm/W

Colour Temperature: 3000K / 4000K / 6000K

Light Angle: 120°

Colour Rendering Index: 90+

Strip Length: 5000mm

Width: 8.5mm

Segment Cut: 3 LEDs / 25mm

Height: 2mm

PCB Colour: White

Protection: IP65 heat shrink

Certificates: TUV , RoHS 

Warranty: 3 Years

Code: 6875 

CORRECT INSTALLATION

For maximum performance in terms of light output and lifetime, installation on a special aluminium profile, designed for proper heat dissipation, is mandatory.

Aluminium profiles not only dissipate heat, but also protect the LED strips from dust, insects and partially from moisture.

CORRECT POWER SUPPLY

LED strips must be powered by a constant voltage power supply unit, normally with a DC symbol.

For 12V LED strips a DC 12V power supply unit is required.

Please note that 12V led strips, powered at one end can reach a maximum length of 5m. To reach longer lengths it is mandatory to power the strip at both ends or in 5m sections.

Always use a power supply with power higher than the power of the led strip.

DIMMERATION

In order to adjust the luminous intensity of a led strip it is necessary to use a suitable controller.

You can dim LED strips with a WiFi controller, use Alexa voice control, manage remotely via Smartphone and even set a timer.