COB Led Strip CRI90 50W 2600lm 24V IP20 PCB 8mm Chip Led Continuous with PCB FREECUT no-cut

5-meter Coil of 50W 24V COB LED Strip, continuous LED chip without a dotted effect, with PCB FREECUT for unrestricted cutting, allowing you to cut the LED strip anywhere you want.

The entire coil has a power consumption of 50W, with a consumption of only 10W per meter, and a brightness of 2600 lm (520 lm/m). LED strip composed of 2640 mini LEDs that make up a continuous Single COB LED, absolute zero dotted light effect. The light is homogeneous, compact, and bright.

High Color Rendering CRI 90+ LED strip with Power Supply Voltage DC 24V (Power supply not included). Dimmable and Cuttable LED strip without constraints wherever you want.

The peculiarity of this COB LED strip is that it can be adapted to all cutting needs thanks to FREECUT PCB. Equipped with adhesive on the back, professional and heat-resistant, with wires for connection already soldered at the beginning and end of the coil.

Connection of multiple LED strips must be done in parallel. For installation, the use of aluminum profiles for heat dissipation is necessary.

TECHNICAL SHEET

Code 7379 / 7380

Width PCB 8 mm

Height PCB+SMD 1.6mm

Length Coil 5m

Power Supply DC 24V

Nominal Power 50W

Effective Power 10 W/m

Nominal Luminosity: 2600 Lumens

Actual Luminosity 520 lm/m

Kelvin: 3000K / 4000K

Color Rendering (CRI) 90+

LED Type COB

Light Angle : 160°

Cuttable: Anywhere (without cutting constraints)

Waterproofing IP20

Dimmable: YES

Certifications CE / RoSH

Warranty 2 Years

CORRECT INSTALLATION

To ensure maximum performance in terms of brightness and durability, installation on a specific aluminum profile, designed for proper heat dissipation, is mandatory.

Aluminum profiles not only dissipate heat but also protect the LED strips from dust, insects, and partially from moisture.

CORRECT POWER SUPPLY

LED strips must be powered with a constant voltage power supply, usually with a DC symbol.

For 24V LED strips, a DC 24V power supply is required.

It is important to note that 24V LED strips, powered at one end, can reach a maximum length of 5m. To achieve longer lengths, it is mandatory to power the strip at both ends or in sections of 5m.

Always use a power supply with higher power than the LED strip's power.

DIMMING

To adjust the brightness of an LED strip, the use of a suitable controller is necessary.

You can dim LED strips with a WiFi controller, button controller, use Alexa's voice control, remotely manage via smartphone, and even set a timer.