Led Strip for Food Counter of Bread and Cheese 72W 24V 2400K b

Led strip for food counter bread and cheese 72W 24V 2400K for indoor use PCB width 10mm 640 SMD 2835 reel

DESCRIPTION

Led strip 2835 of 5 meters, mounted on 3M double-sided tape.
128 Led / mt, (640 total Led) this Led strip is dimmable and cuttable to every 6 Led (62.5mm).
The connection of several Led strips must be carried out in parallel.
For installation it is necessary to use aluminum profiles for dissipation.
This 2400K strip is ideal for illuminating a bakery counter or cheese fridge counter

Power Supply DC 24V (Power supply not included).
Nominal Power 72W per Coil / Power Consumption 14.4 W / mt

DATA SHEET:

Led number: 640 (128 / mt)
Rated power: 72W (14.4W / mt)
Power supply voltage: DC24V
Dimmable: Yes
Led type: SMD2835
Nominal Luminous Flux: -
Efficiency: -
Color Temperature: 2400K
Light angle: 120 °
Color rendering index: 80+
Strip length: 5000mm
Width: 10mm
Cutting Segment: 6 LEDs / 62.5mm
Height: 1.5mm
PCB color: White
Protection: IP20
Certificates: TUV, RoHS
Warranty: 3 Years

CORRECT INSTALLATION

To ensure maximum performance in terms of light output and duration, installation on a special aluminum profile is mandatory, designed for correct heat dissipation.

The aluminum profiles not only dissipate heat, but also protect the LED strips from dust, insects and partially moisture.

PROPER NUTRITION

The LED strips must be powered with a constant voltage power supply, usually with the DC symbol. A DC 24V power supply is required for the 24V led strips.

To calculate the required wattage of the power supply to buy for your led strip, just do a simple mathematical multiplication:

"N ° meters of led strip x Watt per meter absorbed by the strip model = Essential power of the power supply"

Warning: Always buy a slightly more powerful power supply for the result obtained, otherwise your power supply would always work at full load and you would risk burning it.

"Ex: You have 3 meters of 20W LED strip per meter and you want to buy a power supply, the operation to be done will be this: 20 W x 3mt = 60W total absorption for 3 meters of LED strip. You will therefore need a power supply unit of at least 100W "

Remember that the 24V led strips, powered at one end, can reach a maximum length of 5m. To reach higher lengths it is mandatory to feed the strip to both ends or in 5m sections.

Always use a power supply with a power greater than the power of the led strip.

DIMMERATION

To adjust the light intensity of a LED strip it is necessary to use a suitable controller.

You can dim the LED strips with a WiFi controller, from the Button, use Alexa's voice control, remotely manage via Smartphone and also set a timer.