Led Strip 25W 2250lm 24V IP20 PCB 8mm coil of 600 SMD 2835

25W 24V Led Strip dimmable, high colour rendering CRI90+ with 3000K or 2700K warm light.

5-metre 24V Led Strip with 3M double-sided adhesive tape and double cable soldered at the beginning and end of the coil. Led strip with 120 Led/mt (600 Led total), dimmable and cut to every 6 Led (50mm).

This model of LED strip has an absorption of 5 watts per metre (the entire coil absorbs 25W) and is able to emit up to 450 lm per metre. So if 2 metres are installed, you will have a power consumption of 10W and a brightness of 900 lumens.

It is possible to connect several LED strips and the connection must be made in parallel. Aluminium profiles for dissipation are required for installation

This strip is available in 3000K or 2700K warm light.

Supply voltage DC 24V (Power supply not included).

Technical specifications:

Number of Leds: 600 (120/mt)

Nominal power: 25W (5W/mt)

Power supply voltage: DC24V

Dimmable: Yes

Led type: SMD2835

Nominal Luminous Flux: 2500Lm (500Lm/mt)

Efficiency: 100Lm/W

Colour Temperature: 2700K

Light Angle: 120°

Colour Rendering Index: 90+

Strip Length: 5000mm

Width: 8mm

Segment Cut: 6LED/50mm

Height: 1.5mm

PCB colour: White

Protection: IP20

Certificates: TUV , RoHS

Warranty: 3 Years

CORRECT INSTALLATION

To ensure maximum performance in terms of light output and duration, installation on a special aluminum profile is mandatory, designed for correct heat dissipation.

The aluminum profiles not only dissipate heat, but also protect the LED strips from dust, insects and partially moisture.

PROPER NUTRITION

The LED strips must be powered with a constant voltage power supply, usually with the DC symbol. A DC 24V power supply is required for the 24V led strips.

To calculate the required wattage of the power supply to buy for your led strip, just do a simple mathematical multiplication:

"N ° meters of led strip x Watt per meter absorbed by the strip model = Essential power of the power supply"

Warning: Always buy a slightly more powerful power supply for the result obtained, otherwise your power supply would always work at full load and you would risk burning it.

"Ex: You have 3 meters of 20W LED strip per meter and you want to buy a power supply, the operation to be done will be this: 20 W x 3mt = 60W total absorption for 3 meters of LED strip. You will therefore need a power supply unit of at least 100W "

Remember that the 24V led strips, powered at one end, can reach a maximum length of 5m. To reach higher lengths it is mandatory to feed the strip to both ends or in 5m sections.

Always use a power supply with a power greater than the power of the led strip.

DIMMERATION

To adjust the light intensity of a LED strip it is necessary to use a suitable controller.

You can dim the LED strips with a WiFi controller, from the Button, use Alexa's voice control, remotely manage via Smartphone and also set a timer.

Technical specifications:

Number of Leds: 600 (120/mt)

Nominal power: 25W (5W/mt)

Power supply voltage: DC24V

Dimmable: Yes

Led type: SMD2835

Nominal Luminous Flux: 2500Lm (500Lm/mt)

Efficiency: 100Lm/W

Colour Temperature: 2700K

Light Angle: 120°

Colour Rendering Index: 90+

Strip Length: 5000mm

Width: 8mm

Segment Cut: 6LED/50mm

Height: 1.5mm

PCB colour: White

Protection: IP20

Certificates: TUV , RoHS

Warranty: 3 Years